VEE BLOCK AND CLAMP SETS

Add to Enquiry Bag

Enquire Now

Features

Very useful for general for general layout work and for holding round workpieces during drilling, machining and grinding. Supplied in matched and numbered pairs, each having two truly centered 90° Vees of its matching block.
Each pair is manufactured from case hardened steel, precision ground, are supplied with a pair of clamps with steel screws. Hardened to 55 - 60HRC.
Squareness and parallelism within 0.001” (.025mm).
Both our 110635 and 110645 have two grooves on each side of the blocks which will hold the clamp for small or large work.

Need Expert Advice
-Call us-

+ 91 11 43118888

Technical Data

Ordering No. Dimensions Block Width of
Small VEE
Width of
Large VEE
Clamping
Capacity (A)
Net Weight
Kgs.
Length Width Height
Inch mm Inch mm Inch mm Inch mm Inch mm Inch mm
110630 1 25 3/4 20 3/4 20 3/16 5 7/16 11 9/16 14 .60
110635 1.5/8 42 1.1/4 32 1.1/4 32 7/16 11 13/16 20 1 25 .80
110640 2 50 1.3/16 30 1.3/16 30 7/16 11 13/16 20 1 25 0.70
110645 2 50 1.19/32 40 1.19/32 40 1/2 13 1.1/8 28 1.1/2 38 1.30
110650 2 50 1.19/32 40 1.19/32 40 1/2 13 1.1/8 28 1.1/2 38 1.20
110655 2.3/8 63 2 50 2 50 5/8 16 1.1/4 32 1.19/32 40 2.00
110660 3.3/16 80 2.9/16 65 2.9/16 65 7/8 22 1.3/4 45 2 50 4.00
110665 4 100 3 75 3 75 1.3/16 30 2.11/16 68 3 75 7.00

Recently Viewed

Boring Head Kits

Precision Milling Machine Vises

Precision Tilting and Swiveling Machine Vises

Checkout our latest
Product Catalogues

Checkout